MAKING WINDOWS LIVE USB FLASH DRIVE
(UFD windows live)
Usually OS, eg Windows or Linux installed directly to the hard drive, but some are not installed to the hard drive, but run through the CD which is known as Live CD. Now for linux that can run a lot through this CD without installing to your hard drive. For Windows, live cd can be created with the help of certain software that is BartPE.
When the USB Flash Drive began widely used with more capacity on the one gb, the medium for the program is now running OS live without installation to hard drive, would require computer device that can boot from USB.
This is different to boot from USB to do other than through the OS installation CD rom, it can also perform the OS installation cd rom does not pass but through the USB flash drive. But this tutorial is to make OS that can run without installation from USB to computer.
Materials needed.
To create a live windows from a USB flash drive that is stout tutorials on the internet, but here are my test results based on some tutorials available on the internet but it was not exactly the same as that presented, as is practiced there are several things that need midifikasi from us. Here's my experience making windows live from a USB Flash Drive. Required.
1. CD Windows XP SP 2 (original better, I try to use SP 3 but did not succeed)
2. PeBuilder software (I use version 3.1.10a and already in shape. Exe).
3. PeToUSB software (I use version _3.0.0.7, in the form. Zip, do not need to be installed can be run directly)
4. Computer that can boot from USB
How to make:
1. Insert the CD into the drive windows SP2 cd rom
2. Run PeBuilder (after the first installation). when the dialog appears the window. In the Source: the path to windows installation files, click the small box on the right to where the cd rom browsing the windows sp2 cd earlier. Let costum: (include files and folders from this directory) remained empty, while in the field under Output: (c: \ pebuilder3110a \ \ BartPE) still occupied the default BartPE. In Media output none button. Last click Build. Wait until the copy process is complete (approximately 30 minutes)
3. Plug in a USB flash drive (I use 4 gb, 1 gb is enough)
4. Last run PeToUSB.exe software. When the dialog box, under: Destination Drive button click / select button Removable USB. There underneath the dialog box where the USB Flash drive, automatically detected the USB flash drive plugged into the computer. Under Format Option: click the Enable Disk Format. In the Source Path To Build BartPE / WinPe Files, the contents of the box underneath the location of the file created using Windows PeBuilder by clicking the small box on the right to membrowsenya is in C: \ pebuilder3110a \ BartPE. Under the File Copy Options, click the Enable File Copy. Then click the Start wait until the process of copying to a USB Flash Drive is complete. Approximately 30 minutes.
5. Remove the USB Flash Drive Reboot the computer and boot with USB flash drives before, if EEE pc by pressing the Esc key when the boot process will then boot selection dialog appears, whether from "harsidk", USB or Memory card.
